FANUC Servo Amplifier Alarm - (dash)

C Series Fanuc Servo Amplifier Alarms (6066)

Alpha Fanuc Servo Amplifier Alarms (6071, 6079, 6080, 6096)

Fanuc Alpha Power Supply Alarms (6077, 6087)

Fanuc Servo Amplifier Alarms (6089)

Fanuc Servo Amplifier Alarms (6090)

aiS SVM (6114, 6117, 6134)

Servo Amplifier Alarms (6240)

ai B Power Supply Alarms (6200, 6202)

Fanuc Alpha I Power Supply Alarms (6110, 6115, 6140)

Unit is not ready or not commanded to run.

1. Check Emergency Stop. Ensure that the emergency stop button is not engaged. If it is, disengage it and attempt to restart the unit.
2. Check Control Panel. Verify that the control panel settings are correct and that the unit is properly configured for operation.
3. Inspect Interlocks. Check for any interlocks or safety switches that may be preventing the unit from starting. Ensure that all interlocks are engaged properly.
4. Review Program. Check the CNC program to ensure that there are no errors or issues preventing the unit from running. Correct any programming errors if found.
5. Verify Power Supply. Confirm that the power supply to the servo unit is stable and within the specified voltage range. Check for any tripped breakers or power interruptions.
6. Reset the System. Attempt to reset the system by powering off the CNC machine completely, waiting for a few minutes, and then restarting it.
7. Check Servo Amplifiers. Inspect the servo amplifiers for any signs of malfunction, such as overheating or abnormal sounds. Ensure that all connections are secure.
8. Inspect Control Signals. Check the control signals to the servo unit to ensure that they are functioning correctly and are not interrupted.
9. Contact Tri Star for repairs