A06B-6117-H304 FANUC SERVO AMP MODULE AISV-20/20/40
Part Name: FANUC SERVO AMP MODULE AISV-20/20/40
Part Number: A06B-6117-H304
A06B-6117-H304 FANUC Servo Amp Module AISV-20/20/40
Servo motors of CNC machines are powered by the A06B-6117-H304 FANUC Servo Amp Module AISV-20/20/40. Tri Star has expert FANUC repair technicians for restoration of CNC machines. Our technicians have the expertise to repair FANUC parts like the A06B-6117-H304 FANUC Servo Amp Module AISV-20/20/40. If our technicians cannot repair your CNC machine, we offer replacements on an exchange basis.
Fill out an Return Material Authorization (RMA) for repairs.
Tri Star has an inventory of FANUC parts to help make our technicians more efficient in the repairs of spindle amps and CNC machines. Check your machine frequently for damaged parts, if you find there are malfunctioning components, your machine needs to be sent in immediately for repair.
FANUC Servo Alarm Codes
Is your A06B-6117-H304 servo throwing an error? Check our list of FANUC servo alarm codes or call us for a solution.
When small components fail, its puts other components of the machine in harm's way. When we receive your CNC machine for repairs, our technicians will take great care in restoring your machine back to its original quality.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|