A06B-6087-H155 POWER SUPPLY MODULE PSM-55
Part Name: POWER SUPPLY MODULE PSM-55
Part Number: A06B-6087-H155
POWER SUPPLY MODULE PSM-55 A06B-6087-H155
The A06B-6087-H155 power supply module from Tri Star CNC Services, LLC must operate perfectly without interruption to ensure NO downtime. Whether you need the power supply module because your old part no longer works or you need an old part checked out by our CNC repair technicians, we have you covered.
Tri Star CNC Services, LLC is one of the country's best CNC machine parts suppliers. Defective, worn, and failing CNC parts can't be forced to operate—they'll only cause more damage to your machines. Contact Tri Star CNC Services for the PSM-55 A06B-6087-H155 power supply module.
Fill out an Return Material Authorization (RMA) for repairs.
Every CNC part is backed by a 1 year warranty so your shipped orders have insurance. We may have the best CNC parts for sale and the world's leading CNC technicians at our disposal, but we don't handle the delivery! Ordering from Tri Star CNC Services, LLC ensures you have a backup plan when your parts are handled by postal workers around the world.
FANUC Power Supply Module Alarm Codes
Is your A06B-6087-H155 power supply module throwing an error? Check our list of FANUC Power Supply Module alarm codes or call us for a solution.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC power supply repairs - or a new FANUC power supply module. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is not ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|01, 1||The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module.|
|02, 2||Internal cooling circuit faulty.|
|03, 3||The temperature of the heat sink has risen.|
|04, 4||DC voltage (DC link) has dropped|
|05, 5||The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time.|
|06, 6||The input power supply is abnormal (open phase).|
|07, 7||The DC link voltage is abnormally high.|
|08, 8||The offset of the current detection circuit of the main circuit DC link is excessive.|
|8||PSMR||The regenerative discharge unit is heated.|
|16||The main circuit power supply has an open phase.|
|17||The DC link voltage is abnormally high.|
|18||An error occurred in internal parameter data transfer processing.|
|26||The frequency of the main circuit input power supply is abnormal.|
|36||The input power supply of the main circuit has an imbalance.|
|46||When the magnetic contactor is turned on, the phase sequence of the power supply cannot be determined.|
|A0||ROM is faulty.|
|A1||RAM is faulty|
|A2||A software is not operating normally.|
Tri Star CNC Services, LLC has a wide range of repair services for you to choose from, such as: