A06B-6117-H301 FANUC SERVO AMP MODULE AISV-4/4/4
Part Name: FANUC SERVO AMP MODULE AISV-4/4/4
Part Number: A06B-6117-H301
A06B-6117-H301 FANUC Servo Amp Module AISV-4/4/4
The A06B-6117-H301 FANUC Servo Amp Module AISV-4/4/4 supplies power to CNC machine servo motors. Tri Star repair technicians are experts in the restoration and repair of CNC machines. Our technicians have been trained and have experience in the repair of parts like the A06B-6117-H301 FANUC Servo Amp Module AISV-4/4/4.
After receiving your CNC machine, our technicians will do an examination of the machine for damage. If no repairs need to be made, they will charge you for the inspection and a cleaning only. When repairs are required, they will deliver top of the line service on your CNC machine and its broken parts. If your machine cannot be repaired, Tri Star offers replacements on an exchange basis. Trust the Tri Star repair technicians to keep your CNC machines running like new.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|