A06B-6096-H201 FANUC ALPHA SERVO AMP MODULE 2-12/12 F/O
Part Name: FANUC ALPHA SERVO AMP MODULE 2-12/12 F/O
Part Number: A06B-6096-H201
A06B-6096-H201 FANUC Alpha Servo Amplifier
The A06B-6096-H201 is the smallest twin axis FANUC alpha servo amplifier. This version of the FANUC alpha servo amplifier is used in smaller CNC machining centers and runs alpha servo motors 1/3000 and up.
FANUC Servo Amp Alarm Codes
Is your A06B-6096-H201 servo amplifier throwing an error? Check our list of FANUC servo amp alarm codes or call us for a solution.
The A06B-6096-H201 runs i system controls and uses an FSSB interface. FANUC alpha servo amplifier repair specialists at Tri Star CNC Services, LLC provides replacement FANUC components as well as repair services for the A06B-6096-H201.
Fill out an Return Material Authorization (RMA) for repairs.
Timely Service and Repairs
Tri Star CNC performs the quickest and most affordable FANUC repair services to ensure your CNC machine(s) returns to high production in the least amount of time possible. Don't hesitate. Call us today.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is not ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM alarm (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|d||Abnormal current alarm (N axis)|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|