LIMITED TIME ONLY for new customers: 15% off your first repair order!

Part Details

A06B-6117-H257 FANUC SERVO AMP MODULE AISV-40/40L

FANUC parts >> A06B-6117-H257 FANUC SERVO AMP MODULE AISV-40/40L

Part Name: FANUC SERVO AMP MODULE AISV-40/40L

Part Number: A06B-6117-H257

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field

Exchange Price

$2046

OUT OF STOCK
Non return of a repairable exchange part within 15 days will result in an additional invoice for the above exchange price.

Repair Price

$1540

Turnaround times for standard repairs are based on workload. Please contact Tri Star CNC services for emergency repair requirements.
Please contact Tri Star CNC Services to place an order.

A06B-6117H257 FANUC Servo Amp Module AISV-40/40L

The A06B-6117H257 FANUC Servo Amp Module AISV-40/40L provides power to the servo motor of CNC machines. When your CNC machine has malfunctioning parts, send it to Tri Star repair technicians for the highest quality restoration services. Our technicians have a great knowledge in the repair of parts like the A06B-6117H257 FANUC Servo Amp Module AISV-40/40L.

Smaller components of CNC machines have high failure rates making it pertinent to check your machine for damage frequently. When smaller components fail and go unrepaired, it puts other components of your CNC machine at risk for damage. Trust our technicians to fix your malfunctioning parts and get your machine working properly. When large FANUC parts of a machine are beyond repair, Tri Star offers replacements on an exchange basis.

Alarm & error codes

Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm CodeDescription
0 Unit is ready.
- (dash) Unit is not ready and could be related to the unit or machine side cause.
Blinking "-" (a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
1 DC voltage of the main circuit power supply is abnormally high.
2 Inverter: control power supply undervoltage.
5 Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.
6 Inverter:overheat
8 Abnormal current alarm (L axis)
8. (dot) Inverter: IPM (L axis)
9 Abnormal current alarm (M axis)
9. (dot) Inverter: IPM alarm (M axis)
A Abnormal current alarm (N axis)
A. (dot) Inverter: IPM alarm (N axis)
b Abnormally high current in the L–and M–axis motors
c DC link current alarm (M axis)
d DC link current alarm N axis)
F External cooling circuit faulty
L FSSB communication error
P Communication error between amplifier and module
U FSSB communication error

 

 

Contact our Tri Star CNC machine repair technicians for more information on the A06B-6117H257 FANUC Servo Amp Module AISV-40/40L or our other servo motors.

Parts & Repair Warranty Information

Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.

Get more details on our warranty and please contact us for further support.

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field
Call now for FREE phone support
FREE Phone Support
815-578-9145