A06B-6117-H211 FANUC SERVO AMP MODULE AISV-160/160
Part Name: FANUC SERVO AMP MODULE AISV-160/160
Part Number: A06B-6117-H211
A06B-6114H211 FANUC Servo Amp Module AISV-160/160
The A06B-6114H211 FANUC Servo Amp Module AISV-160/160 powers CNC machine servo motors. The FANUC repair technicians at Tri Star have the experience and knowledge needed to restore CNC machines properly. With an inventory of FANUC parts, our expert technicians can repair parts like the A06B-6114H211 FANUC Servo Amp Module AISV-160/160 and replace smaller components to keep your CNC machine running smoothly.
Fill out an Return Material Authorization (RMA) for repairs.
It is essential to examine your CNC machine regularly for damage and malfunctioning parts. If a small component of you CNC machine is malfunctioning, it can cause harm to other components of your machine.
FANUC Servo Amp Alarm Codes
Is your A06B-6117-H211 servo amp throwing an error? Check our list of FANUC servo amp alarm codes or call us for a solution.
If damage is found, send your machine in immediately for repair to our servo amp module repair techs to avoid more costly repair bills. When CNC machines cannot be repaired, Tri Star offers replacements on an exchange basis.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|