A06B-6117-H303 FANUC SERVO AMP MODULE AISV-20/20/20
Part Name: FANUC SERVO AMP MODULE AISV-20/20/20
Part Number: A06B-6117-H303
A06B-6117-H303 FANUC Servo Amp Module AISV-20/20/20
The A06B-6117-H303 FANUC Servo Amp Module AISV-20/20/20 delivers power to CNC machine servo motors. Tri Star has an excellent team of servo amp repair technicians who provide top of the line restoration services. Our technicians are experienced in repairing parts like the A06B-6117-H303 FANUC Servo Amp Module AISV-20/20/20.
Fill out an Return Material Authorization (RMA) for repairs.
Tri Star has an inventory of FANUC parts to help make your CNC machine repair more efficient. It is important to check your CNC machine regularly for malfunctioning parts. Smaller components like the cooling fan have a high failure rate, and when those parts fail it puts other components of your CNC machine at risk.
FANUC Servo Amp Alarm Codes
Is your A06B-6117-H303 servo amplifier throwing an error? Check our list of FANUC servo amp alarm codes or call us for a solution.
When you have a damaged component, you need to send your CNC machine in for repair immediately to help keep your machine running properly. When our technicians find your machine is beyond repair, Tri Star offers replacements on an exchange basis.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|