LIMITED TIME ONLY for new customers: 15% off your first repair order!

Part Details

A06B-6114-H211 GE FANUC SERVO AMP MODULE SVM2-160/160I

FANUC parts >> A06B-6114-H211 GE FANUC SERVO AMP MODULE SVM2-160/160I

Part Name: GE FANUC SERVO AMP MODULE SVM2-160/160I

Part Number: A06B-6114-H211

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field

Exchange Price

$2050

OUT OF STOCK
Non return of a repairable exchange part within 15 days will result in an additional invoice for the above exchange price.

Repair Price

$1564

Turnaround times for standard repairs are based on workload. Please contact Tri Star CNC services for emergency repair requirements.
Please contact Tri Star CNC Services to place an order.

GE FANUC SERVO AMP MODULE SVM2-160/160I

If your A06B-6114-H211 servo amp module is malfunctioning, Tri Star CNC Services, LLC can provide repair services for any defects you may be experiencing. Customers around the world whose productions are currently on hold can be productive again with the help of the repairs we perform on CNC parts like the A06B-6114-H211 servo amp module.

contact tri star cnc services

Fill out an Return Material Authorization (RMA) for repairs.

The supply of replacement CNC parts we have includes new GE FANUC SERVO AMP MODULE SVM2-160/160I parts for your selection. When you have a defective CNC machine part, you'll want to keep your eyes on Tri Star CNC Services, LLC. We repair servo amp modules quickly! When you miss an opportunity to buy your replacement part, you increase the amount of time your production is waiting to go back into operation.

FANUC  	
	A06B-6114-H211 Servo Amp Module Alarm Error Codes

FANUC Servo Amp Module Alarm Codes

Is your A06B-6114-H211 servo amp module throwing an error? Check our list of FANUC servo amp module alarm codes or call us for a solution.

With Tri Star CNC Services, LLC, 1 year warranties are given on all of our CNC parts and products so you can be confident you're on your way back to production once you make your order. When your CNC machine is working, but a part is simply malfunctioning, all you may need is a repair. Fill out our Return Material Authorization (RMA) to take advantage of the repair services available at Tri Star CNC Services, LLC, such as:

Alarm & error codes

Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm CodeDescription
0 Unit is ready.
- (dash) Unit is not ready and could be related to the unit or machine side cause.
Blinking "-" (a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
1 DC voltage of the main circuit power supply is abnormally high.
2 Inverter: control power supply undervoltage.
5 Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.
6 Inverter:overheat
8 Abnormal current alarm (L axis)
8. (dot) Inverter: IPM (L axis)
9 Abnormal current alarm (M axis)
9. (dot) Inverter: IPM alarm (M axis)
A Abnormal current alarm (N axis)
A. (dot) Inverter: IPM alarm (N axis)
b Abnormally high current in the L–and M–axis motors
c DC link current alarm (M axis)
d DC link current alarm N axis)
F External cooling circuit faulty
L FSSB communication error
P Communication error between amplifier and module
U FSSB communication error

 

 

For professional & fast repairs of GE FANUC CNC parts, contact Tri Star CNC Services, LLC today!

Parts & Repair Warranty Information

Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.

Get more details on our warranty and please contact us for further support.

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field
Call now for FREE phone support
FREE Phone Support
815-578-9145