A06B-6114-H103 GE FANUC SERVO AMP SVM1-20
Part Name: GE FANUC SERVO AMP SVM1-20
Part Number: A06B-6114-H103
GE FANUC SERVO AMP SVM1-20 A06B-6114-H103
The A06B-6114-H103 FANUC servo amplifier module SVM1-20 is installed in the world's top CNC machines. This FANUC servo amp is fully capable of powering servo motors for extended operational periods. FANUC CNC machines are more reliable than many competing CNC fabricators.
Fill out a Return Material Authorization (RMA) for repairs.
FANUC Servo Amp Alarm Codes
Is your A06B-6114-H103 servo amp throwing an error? Check our list of FANUC servo amp alarm codes or call us for a solution.
Tri Star CNC technicians deliver exhaustive tests to find the problem plaguing your damaged equipment. We'll get your production cycle resumed faster and cheaper than the competition. You'll always experience the best service at outstanding prices. When a CNC machine part is damaged beyond repair, Tri Star CNC Services, Inc. offers outstanding replacement parts on exchange basis.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|