A06B-6087-H130 ALPHA POWER SUPPLY PSM-30
Part Name: ALPHA POWER SUPPLY PSM-30
Part Number: A06B-6087-H130
FANUC Alpha Power Supply Module A06B-6087-H130 PSM-30
The A06B-6087-H130 PSM-30 is a three phase FANUC alpha power supply module. This three phase power supply is rated for 200-230V input and 283-325V output at 35kW. CNC machining centers throughout the industry rely heavily on the A06B-6087-H130 PSM-130. When electrical components such as the external or internal cooling fan fail, you will need to repair or replace your A06B-6087-H130 PSM-130.
Fill out an Return Material Authorization (RMA) for repairs.
Tri Star CNC Services, LLC's CNC machine repair technicians provide extensive fault testing to identify issues with your FANUC parts and determine the most efficient solution. Our FANUC repair experts provide all necessary FANUC power supply repairs in a timely and effective manner.
FANUC Power Supply Alarm Codes
Is your A06B-6087-H130 power supply throwing an error? Check our list of FANUC power supply alarm codes or call us for a solution.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC power supply repairs - or a new FANUC power supply module. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is not ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|01, 1||The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module.|
|02, 2||Internal cooling circuit faulty.|
|03, 3||The temperature of the heat sink has risen.|
|04, 4||DC voltage (DC link) has dropped|
|05, 5||The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time.|
|06, 6||The input power supply is abnormal (open phase).|
|07, 7||The DC link voltage is abnormally high.|
|08, 8||The offset of the current detection circuit of the main circuit DC link is excessive.|
|8||PSMR||The regenerative discharge unit is heated.|
|16||The main circuit power supply has an open phase.|
|17||The DC link voltage is abnormally high.|
|18||An error occurred in internal parameter data transfer processing.|
|26||The frequency of the main circuit input power supply is abnormal.|
|36||The input power supply of the main circuit has an imbalance.|
|46||When the magnetic contactor is turned on, the phase sequence of the power supply cannot be determined.|
|A0||ROM is faulty.|
|A1||RAM is faulty|
|A2||A software is not operating normally.|
We carry a number of FANUC parts available for purchase on exchange basis so your CNC machining center will be up and running quickly. For all FANUC parts and repairs, Tri Star CNC Services, LLC offers superior service and consistent results.