A06B-6117-H207 FANUC SERVO AMP MODULE AISV-40/40
Part Name: FANUC SERVO AMP MODULE AISV-40/40
Part Number: A06B-6117-H207
FANUC SERVO AMP MODULE AISV-40/40 A06B-6117-H207
Tri Star CNC Services provides replacement A06B-6117-H207 servo amp modules when parts fail and your machinery is left in disrepair. Our FANUC service professionals provide unmatched customer service, including FREE phone support, to help you get your operations back up and running.
Choose to order FANUC parts from our exchange stock (if available) or send us the malfunctioning servo amp module to our headquarters in McHenry, Illinois for repair.
Fill out an Return Material Authorization (RMA) for repairs.
We offer a warranty you won't find anywhere else. Tri Star CNC Services provides a 1-year warranty on complete assembly repair. Most other firms will only cover parts and labor.
FANUC Servo Amp Module Alarm Codes
Is your A06B-6117-H207 servo amp module throwing an error? Check our list of FANUC servo amp module alarm codes or call us for a solution.
All FANUC repairs are performed at our in-house facility in McHenry, Illinois. Parts are tested on a closed loop to eliminate variables and hone in on the diagnosis. With decades of experience with FANUC electronic parts and a sterling body of work, Tri Star CNC Services is your only call.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC servo repairs - or a new FANUC servo amplifier module or FANUC DC servo unit. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|Blinking "-"||(a) Disconnect the feedback cable (JF*) from the Servo Amplifier, and then switch on the power.
<1> If blinking continues → Replace the Servo Amplifier.
<2> If blinking stops → Go to (b).
(b) Disconnect the feedback cable (JF*) from the Pulsecoder, and then switch on the power. (Keep
the cable on the Servo Amplifier side connected.)
<1> If blinking continues → Replace the cable.
<2> If blinking stops → Replace the motor.
|1||DC voltage of the main circuit power supply is abnormally high.|
|2||Inverter: control power supply undervoltage.|
|5||Average regenerative discharge energy is too high (too frequent acceleration/deceleration)–The transformer overheats.|
|8||Abnormal current alarm (L axis)|
|8. (dot)||Inverter: IPM (L axis)|
|9||Abnormal current alarm (M axis)|
|9. (dot)||Inverter: IPM alarm (M axis)|
|A||Abnormal current alarm (N axis)|
|A. (dot)||Inverter: IPM alarm (N axis)|
|b||Abnormally high current in the L–and M–axis motors|
|c||DC link current alarm (M axis)|
|d||DC link current alarm N axis)|
|F||External cooling circuit faulty|
|L||FSSB communication error|
|P||Communication error between amplifier and module|
|U||FSSB communication error|