A06B-6140-H055 FANUC POWER SUPPLY MODULE AIPS-55
Part Name: FANUC POWER SUPPLY MODULE AIPS-55
Part Number: A06B-6140-H055
FANUC POWER SUPPLY MODULE AIPS-55 A06B-6140-H055
FANUC A06B-6140-H055 power amplifiers can work at fast or slower paces. It has an exceptionally powerful power system that provides any amount of power that you need. This A06B-6140-H055 FANUC power supply module AIPS-55 has multi-stage power levels which can be changed.
FANUC Power Supply Alarm Codes
Is your A06B-6140-H055 power supply module throwing an error? Check our list of FANUC servo alarm codes or call us for a solution.
In order to change these power levels, you use a manual switch that is located on the power supply module. Keep this device charged and at optimal power levels by plugging it into a wall outlet. Be careful that you use the recommended power amount for what you are supplying or it could lead to possible damage.
Fill out an Return Material Authorization (RMA) for repairs.
CNC FANUC repair techs at Tri Star fix or exchange the FANUC power supply module AIPS-55 to get your CNC machinery back up and running with no delay. With decades of experience servicing FANUC parts and components, you can trust Tri Star CNC to deliver reliable power supply repairs to your CNC FANUC components.
Contact FANUC repair specialists at Tri Star CNC Services in McHenry, Illinois for repairs or exchanges.
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC power supply repairs - or a new FANUC power supply module. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is ready|
|-(dash)||Unit is not ready and could be related to the unit or a machine side cause.|
|1||PSM-5.5 to PSM-11||The main circuit power module (IPM) has detected an overload, over-current, or control supply voltage decrease, over-current, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module.|
|1||PSM-15 to PSM-55||Over-current flowed into the input of the main circuit. Input supply voltage imbalance, IGBT defective.|
|2||Internal cooling circuit faulty.|
|3||The temperature of the heat sink has risen.|
|4||DC voltage (DC link) has dropped|
|5||The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time.|
|6||The input power supply is abnormal (open phase).|
|7||The DC link voltage is abnormally high.|
|8||The offset of the current detection circuit of the main circuit DC link is excessive.|
|8||PSMR||The regenerative discharge unit is heated.|
|A||Internal cooling circuit faulty.|
|E||The input power supply is abnormal (open phase).|
|H||PSMR||The temperature of the regenerative resistor has arisen abnormally|