LIMITED TIME ONLY for new customers: 15% off your first repair order!

Part Details

A06B-6200-H055 ai-B Power Supply 55

FANUC parts >> A06B-6200-H055 ai-B Power Supply 55

Part Name: ai-B Power Supply 55

Part Number: A06B-6200-H055

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field

Exchange Price

$4508

IN STOCK
Non return of a repairable exchange part within 15 days will result in an additional invoice for the above exchange price.

Repair Price

$3575

Turnaround times for standard repairs are based on workload. Please contact Tri Star CNC services for emergency repair requirements.
Please contact Tri Star CNC Services to place an order.

Alarm & error codes

Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC power supply repairs - or a new FANUC power supply module. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm Code Description
0   Unit is ready.
- (dash)   Unit is not ready and could be related to the unit or machine side cause.
No LED   200-V control power (CX1A) is not supplied. Alternatively, the 24-VDC power is short-circuited.
1 PSM- 5.5 to PSM-11 The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure,  Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module.
1 PSM-15 to PSM-55 Overcurrent flowed into the input of the main circuit. Input supply voltage imbalance, IGBT defective.
2   Internal cooling circuit faulty.
3   The temperature of the heat sink has risen. 
4   DC voltage (DC link) has dropped
5   The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time.
6   The input power supply is abnormal (open phase).
7   The DC link voltage is abnormally high.
8 PSMR The regenerative discharge unit is heated.
A   Internal cooling circuit faulty.
E   The input power supply is abnormal (open phase).
H PSMR The temperature of the regenerative resistor has arisen abnormally
P   Communication error between amplifiers

 

 

 

Parts & Repair Warranty Information

Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.

Get more details on our warranty and please contact us for further support.

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field
Call now for FREE phone support
FREE Phone Support
815-578-9145