A06B-6077-H106 POWER SUPPLY MODULE PSM-5.5
Part Name: POWER SUPPLY MODULE PSM-5.5
Part Number: A06B-6077-H106
POWER SUPPLY MODULE PSM-5.5 A06B-6077-H106
The A06B-6077-H106 may only be one of the many parts contributing to the successful operation of your machine, but without it, your entire operation is defunct. You want to spend your day producing and being profitable, not wasting hours looking for replacement CNC parts online.
FANUC Power Supply Alarm Codes
Is your A06B-6077-H106 power supply throwing an error? Check our list of FANUC power supply alarm codes or call us for a solution.
Use the attached spreadsheet to get the content for the tables (the tables are a special class content block):
Alarm & error codes
Tri Star CNC Services can provide you with more information on the meaning of your alarms. We will provide a fault diagnosis and a dependable 1-year warranty if you require FANUC power supply repairs - or a new FANUC power supply module. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|0||Unit is not ready.|
|- (dash)||Unit is not ready and could be related to the unit or machine side cause.|
|01, 1||The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module.|
|02, 2||Internal cooling circuit faulty.|
|03, 3||The temperature of the heat sink has risen.|
|04, 4||DC voltage (DC link) has dropped|
|05, 5||The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time.|
|06, 6||The input power supply is abnormal (open phase).|
|07, 7||The DC link voltage is abnormally high.|
|08, 8||The offset of the current detection circuit of the main circuit DC link is excessive.|
|8||PSMR||The regenerative discharge unit is heated.|
|16||The main circuit power supply has an open phase.|
|17||The DC link voltage is abnormally high.|
|18||An error occurred in internal parameter data transfer processing.|
|26||The frequency of the main circuit input power supply is abnormal.|
|36||The input power supply of the main circuit has an imbalance.|
|46||When the magnetic contactor is turned on, the phase sequence of the power supply cannot be determined.|
|A0||ROM is faulty.|
|A1||RAM is faulty|
|A2||A software is not operating normally.|
Not only do we provide you with a full list of choices to consider, but we lay out exchange and repair prices as well, making it easy to make your decision in as little time as possible.
For products like the power supply module PSM – 5.5, choose Tri Star CNC Services, LLC!
Fill out an Return Material Authorization (RMA) for repairs.
Whether we're giving attention to a power supply module, spindle amp, power mate, or FANUC part, it doesn't take customers long to realize the value of contacting Tri Star CNC Services, LLC. Our employees are hired based on experience and competency to guarantee you're not dealing with unnecessary delay times! When getting repairs with our company, you can choose between a number of options, including: