A06B-6044-H007 SPINDLE AMP AC SP-3

A06B-6044-H007 SPINDLE AMP AC SP-3 Repair & Parts Exchange

Free Phone Support

For help resolving an issue with your A06B-6044-H007 SPINDLE AMP AC SP-3, give us a call for free phone support. Our technicians are standing by to walk you through machine repairs at no cost. If you need professional repairs for your FANUC CNC parts, we'll walk you through the send-in process to minimize downtime. Call us today for free phone support for your FANUC machine.

FANUC CNC Spindle Amp  Repair Services

Get repairs for your  A06B-6044-H007 SPINDLE AMP AC SP-3 by sending your parts to Tri Star CNC. We always thoroughly inspect, repair and clean your parts before sending them back. To get started, fill out an RMA form and send it along with a contact form. You only pay for the necessary services we perform, so if you part only needed to be cleaned to continue functioning, you'll only be charged for that service. We'll also replace your A06B-6044-H007 SPINDLE AMP AC SP-3 when it has reached the end of its lifecycle.

Tri Star CNC offers the best selection of FANUC replacement parts. When your part has broken, it will put your whole production process on hold. We have the fastest repair turnaround rate, so we’ll have you back up and running as fast as possible. If you still don’t have time to spare, we can send you a replacement part to move the process along even faster.

Field Service

Our send-in repair services are available for all locations within the U.S. Consult our field service map to see whether on-site maintenance for your A06B-6044-H007 SPINDLE AMP AC SP-3 is available.

We provide the following services for all FANUC parts:

• Board repair
• Drive repair
• Power supply repair
• LCD retrofit
• FREE Phone support

Alarm & error codes

When a FANUC alpha spindle amplifier alarm is thrown chances are you'll need support from professionals experienced in FANUC component repairs. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm Code	Alarm Display				Description
	8	4	2	1
	1						Motor is overheated.
2					Speed is deviated from the command value due to overload and others.
3					Regenerative circuit is faulty or Fuse F7 in DC link is blown.
4					Fuses F1, F2, or F3 in AC input circuit are blown.
5					Fuse AF2 or AF3 on PCB is blown.
6					The motor speed exceeds the maximum rated speed (analog system detection).
7					The motor speed exceeds the maximum rated speed (digital system detection).
8					Power voltage (+24 V) is higher than specified.
9					Radiator for power semiconductors is overheated.
10					+15 V power voltage is abnormally low.
11					DC link voltage is abnormally high.
12					DC link current is flows excessively.
13					CPU and peripheral parts are defective.
14					ROM is defective.
15					Option circuit is faulty.

Contact Tri Star CNC Services for the fastest repairs & replacement for CNC parts.