LIMITED TIME ONLY for new customers: 15% off your first repair order!

Part Details

A06B-6055-H108#H526 SPINDLE AMP AC BUILT-IN SP 12

FANUC parts >> A06B-6055-H108#H526 SPINDLE AMP AC BUILT-IN SP 12

Part Name: SPINDLE AMP AC BUILT-IN SP 12

Part Number: A06B-6055-H108#H526

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field

Exchange Price

$5550

OUT OF STOCK
Non return of a repairable exchange part within 15 days will result in an additional invoice for the above exchange price.

Repair Price

$3519

Turnaround times for standard repairs are based on workload. Please contact Tri Star CNC services for emergency repair requirements.
Please contact Tri Star CNC Services to place an order.

SPINDLE AMP AC BUILT-IN SP 12

Spindle drives play a critical role in maintaining consistent speed and torque during machining. As advanced as they are, fuses will eventually blow, digital signal processors will die, and buildup of dust inside the unit can generate enough heat to cause critical parts to fail. When the inevitable happens, turn to Tri Star CNC Services.

With over 90 years of collective experience between us, our technicians have seen and repaired everything that goes wrong with FANUC and GE FANUC spindle amps. One of our founders spent 15 years as a lead technician at FANUC and designed most of their test benches, so we know our stuff. Not surprisingly, we are regarded as THE alternate source for FANUC parts and repairs.

When you send your A06B-6055-H108 Built-in SP 12 spindle amp to us for service, we work quickly to diagnose the problem and make necessary repairs. We use only OEM or better parts, and if necessary we will even reverse engineer and custom manufacture any parts which are no longer available.

While we have your unit, we give it a thorough cleaning to remove any dust build up and even replace any electrical components known to have a high failure rate - at no additional cost to you. We'll also test the unit on a closed loop system to ensure it performs flawlessly. Then, we back our work with the best warranty in the business - one-year parts and labor warranty on the complete assembly. If you prefer, you may also opt to exchange your malfunctioning part (or entire unit) for a fully refurbished one, provided one is available.

With fair pricing, an unmatched warranty and a laser sharp focus on doing quality work, Tri Star CNC Services is all about reducing your long-term cost of ownership so your CNC shop can prosper.

Error codes & alarms

When a FANUC spindle amp alarm is thrown chances are you'll need support from professionals experienced in FANUC component repairs. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm CodeDescription
01 Spindle motor over temp
02 Actual motor speed is largely deviated from the commanded speed.
03 DC link fuse has blown
04 Detected that the 3-phase input to the main circuit of the PSM has an open phase.
07 The motor rotates at a speed exceeding 115% (standard setting) of the maximum allowable speed.
09 Temperature of the heat sink of the SPM main circuit has risen to the set value.
10 Input power voltage dropped.
11 PSM detected that the DC link voltage was excessively high.
12 Excessively large current flowed into the DC link of the main circuit.
13 Memory inside the CPU is faulty.
15 Spindle switching operation sequence was not executed correctly.
16 The memory (RAM) is faulty.
17 NVRAM is faulty.
19 The offset voltage of the phase U current detection circuit is excessively high.
20 The offset voltage of the phase V current detection circuit is excessively high.
24 The power to the CNC is turned off. (This symptom does not represent an error.) Serial communication data transferred between the CNC and spindle amplifier module contains an error.
25 Serial communication between the CNC and spindle amplifier module stopped.
26 The sensor signal (for speed control) for Cs contour control has an error.
27 The sensor signal (position coder signal) for position control is abnormal.
28 The sensor signal (for position control) for Cs contour control is abnormal.
29 An excessive load (standard setting: load meter reading of 9 V) has been applied continuously for a certain period (standard setting: 30 seconds).
30 An excessively large current is detected at the input of the 3-phase main circuit of the PSM.
31 The motor failed to rotate as specified, and has stopped or is rotating at a very low speed.
32 LSI memory for serial communication is abnormal. A check is made when the power is turned on.
33 The PSM could not be charged within a specified time. PSM input has an open phase.
34 Parameter data outside the specifiable range was set.
35 The gear ratio set in a parameter exceeds the value range allowable for internal processing. This alarm is issued with a parameter related to orientation of magnetic sensor type.
36 Error counter overflowed.
37 After emergency stop signal input, the motor is accelerated without being decelerated. This alarm is issued also when the motor is not deactivated (the motor is not decelerated completely) when the acceleration/deceleration time (initial parameter setting: 10 seconds) has elapsed after emergency stop signal input.
39 The position where the one-rotation signal for Cs contour control is generated is incorrect. This alarm is not issued when the parameter indicated below is not set.
40 The one-rotation signal for Cs contour control is not generated.
41 The position where the one-rotation signal of the α position coder, BZ sensor, MZ sensor, α position coder S is incorrect.
47 The count value of α position coder signal pulses is abnormal. The pulse count value of the MZ sensor or BZ sensor is abnormal.

Contact the CNC repair technicians at Tri Star for more information on A06B-6055-H108#H526 AC Built-in SP-12 spindle amp repair services.

Parts & Repair Warranty Information

Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.

Get more details on our warranty and please contact us for further support.

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field
Call now for FREE phone support
FREE Phone Support
815-578-9145