A06B-6047-H041 SERVO UNIT DC 30M
Part Name: SERVO UNIT DC 30M
Part Number: A06B-6047-H041
SERVO UNIT DC 30M A06B-6047-H041
Problems with your FANUC DC 30M Servo Unit? Send us your poor, your tired, your completely fried out A06B-6047-H041 units, and we will give them a bright new future on your production floor.
Here at TriStar CNC Services, our experienced service technicians are well acquainted with the DC 30M servo drive velocity control unit. As a matter of fact, one of our cofounders spent 15 years with FANUC as both a field service engineer and lead technician in their electronics repair division. He actually designed and built numerous test benches at FANUC and also wrote many of the quality standards for the company.
When you send us your damaged unit, we'll work quickly to diagnose the problem and repair your unit using OEM or better parts. All work is done in-house - never outsourced! We replace any electrical components known to have a high failure rate (at no cost to you!), thoroughly clean and test your unit on a closed loop system, then send it on its merry way back to you with a 1-year comprehensive parts and labor warranty. "Comprehensive" as in everything in your A06B-6047-H041 is covered for a full year.
You may also want to consider our exchange program. Just send us your malfunctioning unit and we will give you a fair credit toward the purchase of a fully refurbished unit. While this is a more expensive option, it is also considerably faster than a repair service and far less expensive than purchasing a brand new FANUC A06B-6047-H041 Servo Unit.
With over 60 years of collective experience in the repair of sophisticated CNC equipment and a growing base of loyal customers, TriStar CNC Services is committed to providing the best in FANUC service and repair. Try us and see for yourself.
ALARMS & ERROR CODES
When a FANUC DC servo alarm is thrown chances are you'll need support from professionals experienced in FANUC component repairs. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|BRK||Breaker has tripped.|
|HVAL L/M||DC voltage of the power circuit for that axis is high.|
|HCAL L/M||High current flow of the main circuit of that axis has occurred.|
|OVC L/M||Current exceeding the preset value has continued longer than normal.|
|LVAL||The circuit voltage is unusually low.|
|TGLS L/M||Feedback and velocity command mismatch.|
|DCAL||The regenerative discharge circuit may be faulty.|
Additional FANUC services include:
We also provide: