LIMITED TIME ONLY for new customers: 15% off your first repair order!

Part Details

A06B-6063-H212#H510 SPINDLE AMP AC SP - 12S

FANUC parts >> A06B-6063-H212#H510 SPINDLE AMP AC SP - 12S

Part Name: SPINDLE AMP AC SP - 12S

Part Number: A06B-6063-H212#H510

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field

Exchange Price

$2905

IN STOCK
Non return of a repairable exchange part within 15 days will result in an additional invoice for the above exchange price.

Repair Price

$2790

Turnaround times for standard repairs are based on workload. Please contact Tri Star CNC services for emergency repair requirements.
Please contact Tri Star CNC Services to place an order.

SPINDLE AMP AC SP - 12S A06B-6063-H212#H510

If you have an A06B-6063-H212#H510 needing to be replaced, you've come to the right place. A spindle amplifier is used to power the spindle motors of CNC machines. Our Spindle Amp AC SP-12S can be used to effectively replace parts of the same name in your CNC tools and centers, but if you're really only looking for a repair, Tri Star CNC Services can help save you money. We specialize in FANUC CNC parts, repairs and services, making repairs for parts like the A06B-6063-H212#H510 a simple task. Our CNC repair services are fast and dependable, helping CNC machining centers in the United States get back to their efficient operations in no time.

We also have an extensive stock of parts for your consideration as well. Spindle amps control AC motors in CNC machine tool spindle drive applications and have very specific layouts. This means if a spindle amp breaks down, the correct replacement part needs to be found as quickly and effectively as possible. You won't find the exact spindle amp you need on Amazon or EBay—you need Tri Star CNC Services!

Give us a call today if you know your Spindle Amp AC Sp-12S needs to be replaced as soon as possible. Our FANUC parts are guaranteed to work the moment you receive the shipment as they are backed by a 1 year warranty. Fill out a Return Material Authorization (RMA) for repairs to access the CNC services Tri Star has for customers, including:

Alarm & error codes

When a FANUC serial spindle amplifier alarm is thrown chances are you'll need support from professionals experienced in FANUC component repairs. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:

Alarm CodeDescription
01 Spindle motor over temp.
02 Actual motor speed is largely deviated from the commanded speed.
03 DC link fuse has blown.
04 Detected that the 3-phase input has an open phase.
05 Control power supply fuse blown.
07 The motor rotates at a speed exceeding 115% (standard setting) of the maximum allowable speed.
08 High input voltage.
09 Heat sink is overheated.
10 Input power voltage dropped.
11 DC link voltage was excessively high.
12 Excessively large current flowed into the DC link of the main circuit.
13 Memory inside the CPU is faulty.
15 Spindle switch/output switch sequence faulty.
16 The memory (RAM) is faulty.
18 ROM is defective.
19 The offset voltage of the phase U current detection circuit is excessively high.
20 The offset voltage of the phase V current detection circuit is excessively high.
24 The power to the CNC is turned off. (This symptom does not represent an error.) Serial communication data transferred between the CNC and spindle amplifier module contains an error.
25 Serial transfer data error.
26 The sensor signal (for speed control) for Cs contour control has an error.
27 The sensor signal (position coder signal) for position control is abnormal.
28 The sensor signal (for position control) for Cs contour control is abnormal.
29 An excessive load (standard setting: load meter reading of 9 V) has been applied continuously for a certain period (standard setting: 30 seconds).
30 Defective power regeneration circuit.
31 The motor failed to rotate as specified, and has stopped or is rotating at a very low speed.
32 LSI memory for serial communication is abnormal. A check is made when the power is turned on.
33 DC link circuit problem.
34 Incorrect parameter setting.
35 The gear ratio set in a parameter exceeds the value range allowable for internal processing.
36 Error counter over flow.
37 Incorrect parameter setting for the number of speed feedback pulses.
39 Incorrect data ROM type for Cs contour control detector circuit or incorrect setting.
40 The one-rotation signal for Cs contour control is not generated.
41 Incorrect setting of parameter of number of position coder signal pulses.
42 Alarm for indicating position coder 1 -rotation signal not detected.
43 Alarm for indicating disconnection of position coder signal for differential speed mode.
46 Alarm for indicating failure in detecting position coder 1 -rotation signal in thread cutting operation.
47 Incorrect setting of parameter for number of position coder signal pulses.
48 Position coder 1 -rotation signal abnormality.
49 The converted differential speed is too high.
50 Excessive speed command calculation value in spindle synchronization control.
51 Undervoltage at DC link section.
52 ITP signal abnormality I.
53 ITP signal abnormality II.
54 Overload current alarm.
55 Power line abnormality in spindle switching/output switching.

Contact Tri Star CNC Services for highly dependable CNC parts, repairs, and replacements today.

Parts & Repair Warranty Information

Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.

Get more details on our warranty and please contact us for further support.

Contact Us

For parts repair or replacement, please fill out the form below and we’ll get back to you as soon as possible.

upload pdf

* Indicates a Required Field
Call now for FREE phone support
FREE Phone Support
815-578-9145