A06B-6059-H208#H583 SPINDLE AMP AC SP-8S
Part Name: SPINDLE AMP AC SP-8S
Part Number: A06B-6059-H208#H583
SPINDLE AMP AC SP-3S/6000RPM A06B-6059-H208#H583
Your malfunctioning A06B-6059-H208#H583 spindle amplifier puts CNC machinery and production on hold. By reaching out to FANUC repair specialists at Tri Star CNC services, your part is quickly repaired. Each project, repairs and exchanges, is treated equally, ensuring your experience is personal and customized for your needs.
You want repairs and exchanges to be done by experienced technicians. Tri Star CNC Services has technicians who have made FANUC servo drive repairs and complex control boards for over 15 years. Electrical components with a high failure rate are replaced at no extra charge.
We diagnose the problem and fully test it on a closed loop system to ensure maximum performance. If your part can't be repaired, we find or manufacture a replacement part. No matter the condition, your FANUC component level parts are repaired, and production gets back up and running as soon as possible.
Waiting around won't speed up production. Contacting Tri Star CNC Services will. The quality, fast servicing of your part ensures your CNC machinery gets up and running again for the lowest cost.
ALARMS & ERROR CODES
When a FANUC digital spindle amplifier alarm is thrown chances are you'll need support from professionals experienced in FANUC component repairs. Give us a call - phone support is FREE and we'll clearly define your options for parts repair or replacement:
|01||Spindle motor over temp.|
|02||Actual motor speed is largely deviated from the commanded speed.|
|03||Faulty regen circuit or DC link circuit is faulty|
|04||Detected that the 3-phase input has an open phase.|
|05||AF2 or AF3 fuse blown.|
|09||Heat sink is overheated.|
|11||DC link overvoltage.|
|12||Excessively large current flowed into the DC link of the main circuit.|
|13||Memory inside the CPU is faulty.|
|15||Option alarm, possible spindle switch/output switch sequence faulty.|
|16||The memory (RAM) is faulty.|
|18||ROM sum check alarm|
|19||The offset voltage of the phase U current detection circuit is excessively high.|
|20||The offset voltage of the phase V current detection circuit is excessively high.|
|21||VCMD offset alarm|
|22||TSA offset alarm|
|23||ER offset alarm|