815-578-9145A02B-0166-B501 Power Mate D
FANUC parts >> A02B-0166-B501 Power Mate D
Part Name: Power Mate D
Part Number: A02B-0166-B501
Exchange Price
$1,526
Repair Price
$1,010
FANUC A02B-0166-B501 Power Mate D Repair & Parts Exchange
Free Phone Support
We provide free phone support for issues with your A02B-0166-B501 Power Mate D. Our technicians will walk you through repairing your machine with no cost to you. If your parts require repair, we'll help you send it in for fast repairs so you can resume your operations as quickly as possible. Call us today for free phone support for your machine.
FANUC CNC Power Supply Repair Services
When you send in your parts for repairs, we restore them to a like-new condition. To get started, fill out an RMA form and send it along with a contact form. If we have an exchange part ready, we can send it to you while you wait so you can keep our machine running while you wait.
We also repair other FANUC parts. View our full list of services:
FANUC CNC Power Supply Alarm Codes
Check out our list of alarm codes to learn why your power supply is causing an issue. For any issues that you can't resolve on your own, get in touch with us on the phone and we'll help you troubleshoot. If it can't be resolved remotely, we'll walk you through the send-in repair process.
We provide alarm codes for other FANUC parts. View our full list of alarm codes:
Field Service
You can send in your parts for repair anywhere in the U.S. For on-site repairs, refer to our field service map to see which states are within our reach.
| Alarm Code | Message | Description |
|---|---|---|
|
PSM-5.5 to PSM-11 |
The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module. |
|
|
PSM-15 to PSM-55 |
Overcurrent flowed into the input of the main circuit. Input supply voltage imbalance, IGBT defective. |
|
|
N/A |
Internal cooling circuit faulty. |
|
|
N/A |
The temperature of the heat sink has risen. |
|
|
N/A |
DC voltage (DC link) has dropped |
|
|
N/A |
The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time. |
|
|
N/A |
The input power supply is abnormal (open phase). |
|
|
N/A |
The DC link voltage is abnormally high. |
|
|
N/A |
The offset of the current detection circuit of the main circuit DC link is excessive. |
|
|
PSMR |
The regenerative discharge unit is heated. |
|
|
N/A |
The main circuit power supply has an open phase. |
|
|
N/A |
The DC link voltage is abnormally high. |
|
|
N/A |
An error occurred in internal parameter data transfer processing. |
|
|
N/A |
The frequency of the main circuit input power supply is abnormal. |
|
|
N/A |
The input power supply of the main circuit has an imbalance. |
|
|
N/A |
When the magnetic contactor is turned on, the phase sequence of the power supply cannot be determined. |
|
|
N/A |
Internal cooling circuit faulty. |
|
|
N/A |
ROM is faulty. |
|
|
N/A |
RAM is faulty |
|
|
N/A |
A program is not operating normally. |
|
|
N/A |
The input power supply is abnormal (open phase). |
|
|
N/A |
The temperature of the regenerative resistor has arisen abnormally |
Parts & Repair Warranty Information
Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.
Call now for FREE phone support