CRT to LCD Conversion

Improve Your CNC Machine with a CRT to LCD Retrofit

If you have a CNC machine with a CRT monitor, you are most likely already experiencing the many defects and disadvantages these monitors present after years of use. You may also already know CRT monitors are extremely difficult and in most cases impossible to replace.

FANUC repair contact button
 

If you can find a replacement CRT monitor, which is unlikely, it will cost you a pretty penny to replace. The end result, you have an outdated monitor which will present the same issues you are suffering from now in just a few years. Repairing a CRT monitor is also a very expensive solution, if not impossible, with the same results. Don’t waste your money or risk large amounts of down time with your CNC machine, have Tri Star upgrade your CRT monitor today with an LCD retrofit.

FANUC Control CRT Models Tri Star LCD Retrofits

CRT Monitor Corresponding LCD Retrofit
A61L-0001-0072 A61L-0001-0092/LCD
A61L-0001-0074 A61L-0001-0074/LCD
A61L-0001-0076 A61L-0001-0092/LCD
A61L-0001-0086 A61L-0001-0092/LCD
A61L-0001-0092 A61L-0001-0092/LCD
A61L-0001-0093 A61L-0001-0093/LCD
A61L-0001-0094 A61L-0001-0094/LCD
A61L-0001-0094/A A61L-0001-0094/LCD
A61L-0001-0095 A61L-0001-0095/LCD
A61L-0001-0096 A61L-0001-0096/LCD

 

Disadvantages of CRT Monitors:

  • CRT monitors are extremely heavy
  • CRT monitors occupy and consume large volumes of electricity
  • Over time CRT monitors present several defects

CRT Monitor Defects:

  • In different sectors of the display, color spots can start to appear and hinder visibility
  • When your monitor displays an image for long periods of time, an ageing affect called raster burn can disfigure your monitor and reduce the monitor’s brightness significantly
  • Pattern burn can occur as well, this occurs when the tube is imprinted with the image the monitor is displaying
  • You may also experience scan burn, this results in a line with reduced visibility across your CRT monitor

The defects CRT monitors experience overtime can seriously hinder the operator’s ability to read the screen. When correctly identifying patterns or writing on the CRT screen plays a large role in the operation of your CNC machine and business, this can cause large amounts of down time. Not only do these defects affect the operation of your CNC machine, they also cause your CNC machine users to strain their eyes in an attempt to read what the monitor is displaying. Essentially making your workers, and in turn your CNC machine, less efficient.

CRT Monitor Replacement Makes Your CNC Machine More Efficient

Tri Star’s highly skilled CNC machine repair technicians now provide LCD upgrade services for your old CRT Monitors. This not only saves you large sums of money, but also gives you a more reliable screen with unbelievably clear visibility. Our new LCD retrofits will be placed into the same frame as your outdated CRT monitor, providing a new monitor that works the same, and in many cases, better than the old CRT monitors both electronically and physically.

The new LCD retrofit is more energy efficient, has high contrast for an exceptionally clear picture and requires no new signal adapters of any sort, allowing your CNC machine to go back to work quickly and with higher efficiency. If your CRT monitor is experiencing problems, it is important to solve the problem sooner than later. CNC machines run as a collective unit, if one component (even a small component) starts to fail, there is the risk of other parts failing and your CNC machine stopping completely. Don’t rely on technology from the 80’s, upgrade your CRT monitor today with the help of Tri Star!

 

If you need an LCD retrofit for your CRT monitor but you don’t see your monitor’s model above, contact our CRT monitor replacement technicians to see if we can custom make your LCD monitor.
4/7/2017 How Do FANUC Robots Work? 4/7/2017
3/3/2016 How Does a Servo Drive Work? 3/3/2016
12/10/2015 CNC Machining vs. 3D Printing 12/10/2015
Did you know this?
Setting Zero Return on Fanuc machines or any CNC Machine can sometimes be difficult. Each builder has their own way to set zero return through their own side of the control.

Accepting VISA  Accepting MasterCard

Accepting Discover  Accepting American Express


Tri Star CNC Services,  LLC BBB Business Review